Utilisation de voice plus, 89 _ english français _ 89 using the voice plus – Samsung SC-DX103-XAA Manuel d'utilisation

Page 95

Advertising
background image

UTILISATION DE VOICE PLUS

La fonction Voice Plus ne fonctionne qu’en mode

Lecture caméscope DVD. Page 38

Cette fonction vous permet d’intégrer votre narration

à un disque préenregistré à l’aide du microphone du

caméscope DVD.

Si vous souhaitez copier un DVD sur un autre

appareil AV (graveur DVD, magnétoscope), vous

pouvez repiquer votre propre voix à l’aide du

microphone intégré du caméscope DVD plutôt que

de copier les signaux audio du disque préenregistré.

1. Raccordez le caméscope DVD à votre appareil AV à l’

aide du câble AV. Page 86

2. Réglez le bouton Storage mode sur DISC.

(SC-DX103/ DX105 uniquement)  page 30

3. Insérez le disque que vous souhaitez lire dans le

caméscope DVD.

4. Appuyez sur la touche MODE pour défi nir le mode

de lecture.

5. Utilisez le manche à balai pour sélectionner l’image

de votre choix.

6. En cours de lecture, appuyez sur la touche

Enregistrement marche/arrêt sur le point souhaité.

L’icône Voice Plus ( ) s’affi che et «

Voice + »

clignote pendant quelques instants.

Le son du microphone intégré sera repiqué vers

le dispositif AV raccordé plutôt que le son du

disque préenregistré.

7. Pour annuler, appuyez à nouveau sur la touche Enregistrement marche/arrêt.

Voice Plusn’est disponible que lorsque le câble AV est raccordé. Si vous

avez branché un câble USB, la fonction Voice Plus peut mal fonctionner.

(SC-DX103/DX105 uniquement)

Si vous activez la fonction Arrêt, Lecture/Pause, REW, ou FF durant l’

exécution de la fonction Voice +, elle se désactive.

Si la fonction Voice Plus est activée, la touche

MENU ou PHOTO n’est

pas disponible.

La fonction Voice Plus n’affecte pas la trame sonore originale du disque

enregistré.

Si vous utilisez la fonction Voice+, le son est transféré du microphone

intégré du caméscope vers l’appareil AV raccordé. Assurez-vous que le

microphone n’est pas caché ou bloqué de quelque façon.

Réglez le volume sonore de l’appareil AV raccordé. (TV, système audio

etc.)

Si vous placez le caméscope DVD près des enceintes acoustiques du

périphérique, cela peut produire une contre réaction.

Diminuez le volume du périphérique et gardez le caméscope DVD à

une distance raisonnable.

89_ English

Français _

89

USING THE VOICE PLUS

The Voice Plus function works only in the DVD

camcorder play mode. page 38

This function enables you to narrate over a pre-

recorded disc via the DVD camcorder’s microphone.

When you want to copy a DVD onto other AV devices

(DVD recorder, VCR), you can dub your voice sound

incoming from the internal microphone of your DVD

camcorder to an AV device, instead of copying the

audio signals on a pre-recorded disc.

1. Connect the DVD camcorder to your AV device with

AV cable. page 86

2. Set the Storage mode switch to DISC. (SC-DX103/

DX105 only) page 30

3. Insert the disc you wish to play back in this DVD

camcorder.

4. Press the MODE button to set the Play mode.

5. Use the Joystick to select the desired image.

6. Press the Recording start/stop button on a point where you

want during the playback.

Voice Plus icon ( ) is displayed and “

Voice +” will blink

for a while.

Sound signals incoming from the internal microphone will

be dubbed to a connected AV device, instead of copying

the pre-recorded sound on a disc.

7. To cancel, press the Recording start/stop button again.

Voice Plus is available only when the AV cable is connected. If a USB

cable is connected, the Voice Plus function may not operate properly.

If you perform Stop, Play/Pause, REW, or FF while the Voice Plus

function is being executed, the Voice Plus function will be deactivated.

(SC-DX103/DX105 only)

When the Voice Plus function is in progress, the

MENU button or

PHOTO button does not work.

The Voice Plus function does not affect the original sound on the

recorded disc.

Sound is transferred from the internal microphone on this DVD camcorder

to the connected AV device, when using the Voice Plus function. Make

sure the microphone is not covered or blocked in any way.

Adjust the sound volume on the connected external device. (TV, audio

system etc.)

Feedback may occur if the DVD camcorder is placed near the speaker

of an external device.

Turn down the volume of the external device and keep the DVD

camcorder a reasonable distance away.

0:00:59

Voice +

012

����

TV

Signal fl ow

AV cable

DVD camcorder

(AD68-02550B)SC_DX100_ENG+FRE.indb 89

2008-03-05 ¿ААь 10:52:50

Advertising
Ce manuel est liée aux produits suivants: