Rockwell Automation 1440-DYN02-01RJ XM Dynamic Measurement Module - Manuel (Page 96)

96 Publication ICM-UM002F-EN-E - March 2013
Appendix A I/O Data Tags
Configuration Data Type
Module-defined Data Type: AB:1440_VDP_ChConfig_Struct:C:0
Member Name Type Default Display Style Description
OverallFilterEN BOOL Decimal 0 = None
1 = Low Pass Filter
SynchronousModeEN BOOL Decimal 0 = Asynchronous (Default)
1 = Synchronous with tach
XdcrPower SINT Decimal 0 = Off (Default)
1 = IEPE
2 = +24V
3 = -24V
4 = Bias Current
XdcrSensitivityUnits SINT Decimal 0 = mV/ mil (Default)
1 = mV/ in/s
2 = mV/ g
3 = mV/ psi
4 = V/ V
5 = mV/ mm/s
6 = mV/ µm
8 = mV/ mbar
9 = V/ g
XdcrLLimit REAL Float -24.0 to 24.0 volts (Default = -18.0 volts)
XdcrHLimit REAL Float -24.0 to 24.0 volts (Default = -2.0 volts)
XdcrSensitivity REAL Float Default = 200.0
(XdcrSensitivityUnits selection determines
the units)
FullScale REAL Float Default = 10.0
(FullScaleUnits selection determines the
units)
FullScaleUnits SINT Decimal 0 = mil (Default)
1 = in/s
2 = g
3 = psi
4 = volt
5 = mmps
6 = µm
8 = mbar
SignalMeasurementType SINT Decimal 0 = RMS
1 = Calculated peak
2 = Calculate pk-pk
3 = True peak
4 = True pk-pk (Default)
FFTWindowType SINT Decimal 0 = Rectangular
1 = Hamming
2 = Hanning (Default)
3 = Flat Top
4 = Kaiser Bessel