Rockwell Automation 1440-DYN02-01RJ XM Dynamic Measurement Module - Manuel (Page 147)

Publication ICM-UM002F-EN-E - March 2013 147
CIP Objects Appendix B
Transducer Object
(Class ID 328
H
)
The Transducer Object models a transducer.
Class Attributes
The Transducer Object provides no class attributes.
Instances
There are 3 instances of this object.
Instance Attributes
Table B.48 Band Measurement Object Instances
Instance Descriptions
1 Vibration Channel 0
2 Vibration Channel 1
3 Tachometer Channel
Table B.49 Transducer Object Instance Attributes
Attr ID
Access
Rule Name Data Type Description Semantics
3 Get DC Bias REAL The measured average DC
bias of the transducer
signal in volts. Volts
4 Get Status BOOL Indicates whether a
transducer fault exists
(the measured
DC Bias is
outside the range
specified by
Fault High
and
Low).
0 = No fault
1 = A transducer fault exists
5 Get/Set Sensitivity
Value REAL Value of the sensitivity of
the transducer in
millivolts per
Sensitivity
Units.
This value must be +/- 15% of
the
Nominal Sensitivity value.