Rockwell Automation 1440-DYN02-01RJ XM Dynamic Measurement Module - Manuel (Page 71)

Publication ICM-UM002F-EN-E - March 2013 71
Configure XM Module in RSLogix 5000 Software Chapter 3
Configure the Spectrum Properties
The Spectrum tab configures the spectrum and waveform measurements from
the Dynamic Measurement module. There are two instances of the
spectrum/waveform measurements, one for each channel.
1. From the Module Properties dialog box, click the Spectrum tab.
2. Click the Channel that you want to configure.
3. Configure the parameters, as necessary.
In this field Values are Comments
Channel Name A descriptive name for the channel. This can be entered on the Channel tab. See
Configure the Channel Properties on page 64 .
Sampling Mode Choose the sampling mode.
• Asynchronous
• Synchronous with tach
The sampling mode determines whether the
signal is synchronized with the tachometer
signal and has several effects on the resulting
measurements.
Synchronous sampling requires a tachometer
signal.