Schedule the i/o module connections, Access module data using the acnr – Rockwell Automation 1440-DYN02-01RJ XM Dynamic Measurement Module Manuel d'utilisation
Page 84
84
Publication ICM-UM002F-EN-E - March 2013
Chapter 3 Configure XM Module in RSLogix 5000 Software
Save Module Configuration
and Download to the
Controller
We recommend that after a module is configured you save your work and
download the configuration to the controller and module. Refer to the XM
ControlNet Adapter User Manual, publication
he
ControlNet Modules in Logix5000 Systems User Manual, publication
for details.
Schedule the I/O Module
Connections
You must use RSNetWorx™ for ControlNet software to schedule the network
in order to activate the configured XM module. Refer to the XM ControlNet
Adapter User Manual, publication
or the ControlNet Modules
in Logix5000 Systems User Manual, publicatio
for details.
Access Module Data using
the ACNR
The module-defined data types and tags are automatically created when you
configured the Dynamic Measurement module in RSLogix 5000 software.
These tags allow you to access the input, output, and configuration data of the
module via the controller’s ladder logic.
To access the module data, double-click Controller Tags.
The Controller Tags dialog opens.
for more
information.