Rockwell Automation 1440-DYN02-01RJ XM Dynamic Measurement Module - Manuel (Page 118)

118 Publication ICM-UM002F-EN-E - March 2013
Appendix B CIP Objects
Class Attributes
Instances
There are 39 instances of this object.
Table B.17 Parameter Object Class Attributes
Attr ID
Access
Rule Name Data Type Description Semantics
2 Get Max Instance UINT Maximum instance
number of an object in
this class. Total number of parameter
object instances.
8 Get Parameter Class
Descriptor WORD Bits that describe the
parameter. Bit 0 Supports Parameter
Instances
Bit 1 Supports Full Attrib.
Bit 2 Must do non-volatile store
Bit 3 Params in non-volatile
9 Get Config.
Assembly
Instance UINT Set to 0
Table B.18 Parameter Object Instances
Instance
Read
Only Name Data Type Valid Values Default Value
1 No Transducer 1 Sensitivity Units USINT 0 = mil
1 = in/s
2 = g
3 = psi
4 = volts
5 = mm/s
6 = µm
7 = Pa
8 = mbar 0
2 No Transducer 2 Sensitivity Units USINT (same as above) 0
3 No Channel 0 Measurement Units USINT 0 = mil
1 = in/s
2 = g
3 = psi
4 = volts
5 = mm/s
6 = µm
7 = Pa
8 = mbar 0
4 No Channel 1 Measurement Units USINT (same as above) 0