Breville BBM800XL - Manuel (Page 16)

16
OPERATING yOUR BREvILLE BREAd MAKER - BEGINNER’S GUIdE
ingredients to break down rather than maintain their shape
within the dough.
a) Ensure the bread pan is in the baking chamber and the lid
is closed. Loading ingredients into the dispenser before this
time increases the risk of ingredients falling into the baking
chamber and burning during the ‘bake’ phase.
b) Lift open the lid of the Automatic Fruit and Nut Dispenser.
Touch the base of the dispenser to check that it is completely
closed before adding a maximum ¾ cup of dry ingredients. If
the base is open, see Troubleshooting, page 58.
c) Always remember:
− Ingredients should be suitably sized so they do not fall
through the steam vents at the base of the dispenser.
We recommend separating ingredients that may stick
together, such as raisins and other fruits, before adding.
− Liquids should not be added to the dispenser.
− Glacé (glazed) fruits such as cherries, ginger, pineapple,
etc. should be washed and well-dried on kitchen paper
towel before adding into the dispenser.
− Bottled or canned ingredients such as olives, sun dried
tomatoes etc. should be drained and well-dried on
kitchen paper towel before adding to the dispenser.
− It is recommended that the dispenser be cleaned
thoroughly with a soft, damp cloth after each use.
d) The Fruit and Nut Dispenser will automatically release
its contents on the BASIC, BASIC RAPID, WHOLE
WHEAT, WHOLE WHEAT RAPID, GLUTEN FREE,
CRUSTY LOAF, SWEET, YEAST FREE and all DOUGH
settings. You may notice the base of the dispenser flip
open during the bread making cycle even when it is empty.
This is normal. It is the dispenser automatically releasing
ingredients 8 minutes before the end of the ‘knead 2’
phase, regardless of whether it has been loaded.
TIP
If ingredients exceed the maximum ¾ cup capacity of the
dispenser, lift open the lid and add ingredients manually
when the ‘add-in’ alert sounds 8 minutes before the end
of the ‘knead 2’ phase. Ensure the BEEPER button has not
been muted and the sound alerts are on - there should be
no symbol on the LCD screen. Do not press and hold
the CANCEL button to add ingredients as this will cancel
the entire cycle.
6. Plug in the Power Cord
a) Unwind the power cord completely and insert the power
plug into a grounded power outlet.
b) An alert will sound and the LCD screen will illuminate. The
function options will appear with an indicator on the preset
BASIC setting.
7. Select the Setting
a) Turn the SELECT push-dial until the indicator on the
LCD screen reaches the desired setting. Press the push-
dial to select.
b) If you accidentally press the wrong setting, press the
CANCEL button to return to the main menu and make your
selection again.
BBM800XL_IB_FA.indd 16 1/07/10 10:47 AM