Using special effects – digital effect, Utilisation d’effets spéciaux – effets numériques – Sony DCR-TRV355E Manuel d'utilisation

Page 86

Advertising
background image

86

(1) In CAMERA mode, press MENU to display

the menu settings.

(2) Turn the SEL/PUSH EXEC dial to select

D EFFECT in

, then press the dial (p. 265).

(3) Turn the SEL/PUSH EXEC dial to select the

desired digital effect mode.

(4) Press the SEL/PUSH EXEC dial. The bars

appear on the screen. In the STILL and LUMI.
modes, the still image is stored in memory.

(5) Turn the SEL/PUSH EXEC dial to adjust the

effect, then press the dial.

Effect

Items to be adjusted

STILL

The degree of still image you
want to superimpose on the
moving picture.

FLASH

The interval of flash motion.

LUMI.

The brightness of the area in the
still image which is to be
swapped with a moving picture.

TRAIL

The vanishing time of the
incidental picture.

SLOW SHTR

Shutter speed. The larger the
shutter speed number, the slower
the shutter speed becomes.

OLD MOVIE

No adjustment necessary.

The more bars there are on the screen, the
stronger the effect. The bars appear in the
following modes: STILL, FLASH, LUMI. and
TRAIL.

Using special effects
– Digital effect

4

2

MANUAL SET
D EFFECT
OFF
STILL
FLASH
LUMI.
TRAIL
SLOW SHTR
OLD MOVIE

[MENU] : END

[MENU] : END

MANUAL SET
D EFFECT

LUMI.

I I I I I I I I

• • • • • • • •

MENU

(1) En mode CAMERA, appuyez sur MENU pour

afficher les réglages de menu.

(2) Tournez la molette SEL/PUSH EXEC pour

sélectionner D EFFECT dans

, puis

appuyez sur la molette (p. 279).

(3) Tournez la molette SEL/PUSH EXEC pour

sélectionner le mode d’effet numérique
souhaité.

(4) Appuyez sur la molette SEL/PUSH EXEC.

L’indicateur à barres s’affiche à l’écran. Dans
les modes STILL et LUMI., l’image fixe est
mémorisée.

(5) Tournez la molette SEL/PUSH EXEC pour

ajuster le réglage, puis appuyez sur la molette.

Effet

Eléments à régler

STILL

Réglage de l’intensité de l’image
fixe que vous souhaitez
superposer sur l’image animée.

FLASH

Réglage de l’effet stroboscopique.

LUMI.

Réglage de la luminosité de la
zone de l’image fixe devant être
remplacée par une image animée.

TRAIL

Réglage de la durée de
rémanence de l’image.

SLOW SHTR

Réglage de la vitesse
d’obturation. Plus le numéro est
élevé, plus la vitesse est lente.

OLD MOVIE

Aucun réglage nécessaire.

Plus il y a de barres affichées à l’écran, plus l’effet
est accentué. Les barres apparaissent dans les
modes suivants : STILL, FLASH, LUMI. et
TRAIL.

Utilisation d’effets spéciaux
– Effets numériques

Advertising
Ce manuel est liée aux produits suivants: