Sony DCR-TRV355E - Manuel (Page 298)

298
Others
Symptom Cause and/or Corrective Action
• Your VCR and/or video camera recorder is not set correctly.
c Make sure the input selector of the VCR is set to LINE. Also,
make sure the power switch of the video camera is set to
VTR/VCR (p. 127).
• The IR SETUP code or PAUSE MODE is not set correctly.
c Select the correct IR SETUP code and PAUSE MODE,
according to your VCR. Then confirm VCR operation with
the IR TEST function (p. 127).
• The input selector on the VCR is not set correctly.
c Check the connection and set the input selector on the VCR
again (p. 137).
• Your camcorder is connected to DV equipment of other than
Sony using the i.LINK cable.
c Set it to IR (p. 137).
• You have attempted to set a programme on a blank portion of
the tape.
c Set the programme again on a recorded portion (p. 145).
• Your camcorder and the VCR are not synchronised.
c Adjust the synchronisation (p. 143).
• The IR SETUP code is incorrect.
c Set the correct code (p. 130).
• PB MODE is set to / in the menu settings.* 3)
c Set it to AUTO (p. 269).
• Setting programme on a blank portion of the tape is attempted.
c Set the programme again on a recorded portion (p. 194).
• COMMANDER is set to OFF in the menu settings.
c Set it to ON (p. 277).
• Something is blocking the infrared rays.
c Remove the obstacle.
• The batteries are inserted with + and – incorrectly matching
+ and – inside the battery compartment.
c Insert the batteries correctly (p. 357).
• The batteries are dead.
c Insert new ones (p. 357).
Easy Dubbing does not function.* 1)
Digital program editing to a tape
does not function.*
2)
Digital program editing to a
“Memory Stick” does not function.*
4)
The Remote Commander supplied
with your camcorder does not
work.*
5)
* 1)
* 2)
* 3)
* 4)
* 5)
* 6)
Types of trouble and how to correct trouble