Labconco Protecto Ech Filtered Fume Hoods 183 Series 8' - Manuel (Page 55)

Chapter 4: Performance Features & Safety Precautions
Product Service 1-800-522-7658 49
Original instructions
Safety Precautions
Although the filtered fume hood has been engineered to
maintain optimum operator safety, caution should always be
used while working in the hood. Prior to using the hood, check
to make sure that the exhaust blower is operating and that air
is entering the hood at its specified face velocity.
Bien que la hotte filtrée a été conçu pour maintenir une
sécurité optimale de l'opérateur, la prudence doit toujours être
utilisé tout en travaillant dans la hotte. Avant d'utiliser le
capot, assurez-vous que le ventilateur d'échappement est en
marche et que l'air entre dans la hotte à sa vitesse nominale
spécifiée.
USE GOOD HOUSEKEEPING IN THE HOOD AT ALL TIMES.
CLEAN UP SPILLS IMMEDIATELY WITH A MILD
DETERGENT. PERIODICALLY CLEAN HOOD INTERIOR,
INCLUDING FLUORESCENT LIGHT GLASS PANEL.
REPLACE BURNED OUT LIGHT BULBS TO MAINTAIN
MAXIMUM ILLUMINATION.
DO NOT OVERLOAD THE WORK SURFACE WITH
APPARATUS OR WORK MATERIAL. THE SAFE
OPERATION OF THE LABORATORY HOOD IS BASED
UPON HAVING PROPER AIRFLOW THROUGH THE
STRUCTURE. DO NOT PLACE LARGE, BULKY OBJECTS
SUCH AS BLOCK HEATERS, DIRECTLY ON THE HOOD
WORK SURFACE. INSTEAD, ELEVATE THE OBJECT 2" TO
3" ON BLOCKS TO ALLOW A FLOW OF AIR UNDER THE
OBJECT AND INTO THE LOWER REAR BAFFLE EXHAUST
SLOT. ENSURE BLOCKS ARE LEVEL AND SECURED IN
PLACE.
!
