Labconco Protecto Ech Filtered Fume Hoods 183 Series 8' - Manuel (Page 43)

Chapter 3: Getting Started
Product Service 1-800-522-7658 37
Original instructions
Press
“X”
to return to the previous menu.
***Disregard the sash calibration for now. It will be covered later.***
Press
“X”
again to return to the previous menu.
Step 8 – Scan user cards.
Now you should see:
Language
Date and Time
Filters
Alarms and Sensors
Users and Management
Network Parameters
Erase History
Ventilation
Arrow down to
“Users and Management”
press
“Ok”
to select it.
You should see:
>Set
List
Delete
Select
“Set”
by pressing
“Ok”
to select it.
Scan in the
“user card”
that was used at that hood.
Do this by removing the
“Maintenance card”
to scan in the
“user card.”
You should hear a beep and the screen will say
“user added.”
Now press
“Ok.”
Then
“X”
to return to the previous menu.
Step 9 – Enter network parameters
.
You should now see:
Language
Date and Time
Filters
Alarms and Sensors
Users and Management
Network Parameters
Erase History
Ventilation