Unpacking your fume hood, Removing the shipping skid – Labconco Protecto Ech Filtered Fume Hoods 183 Series 8' Manuel d'utilisation

Page 16

Advertising
background image

Chapter 3: Getting Started

Product Service 1-800-522-7658

10

Original instructions

Unpacking Your Fume Hood


Carefully remove the shrink-wrap or carton on your fume hood and inspect it for
damage that may have occurred in transit. All the filtration fans and lights are
packaged in boxes on top of the hood liner and should not be discarded.
If
your unit is damaged, notify the delivery carrier immediately and retain the entire
shipment intact for inspection by the carrier.

DO NOT RETURN GOODS WITHOUT THE PRIOR
AUTHORIZATION OF LABCONCO. UNAUTHORIZED
RETURNS WILL NOT BE ACCEPTED.

IF YOUR HOOD WAS DAMAGED IN TRANSIT, YOU MUST
FILE A CLAIM DIRECTLY WITH THE FREIGHT CARRIER.
LABCONCO CORPORATION AND ITS DEALERS ARE NOT
RESPONSIBLE FOR SHIPPING DAMAGES.


Do not discard the shipping skid, fan boxes, harnesses, or packing material for
your filtered fume hood until you have checked all of the components and
installed and tested the unit. Do not remove the filtered fume hood from its
shipping skid until it is ready to be placed into its final location. Move the unit by
placing a flat, low dolly under the shipping skid, or by using a floor jack.

Do not move the hood by tilting it onto a hand truck.

Ne pas déplacer la hotte en le penchant sur un diable.

Removing the Shipping Skid

LEAVE THE FUME HOOD ATTACHED TO ITS SHIPPING
SKID UNTIL IT IS AS CLOSE TO ITS FINAL LOCATION AS
POSSIBLE. MOVE THE HOOD BY USING A SUITABLE
FLOOR JACK, OR BY PLACING A FURNITURE DOLLY
UNDERNEATH THE SKID. DO NOT MOVE THE HOOD BY
TILTING IT ONTO A HAND TRUCK.

After you verify the fume hood components, move your hood to the location
where you want to install it. Should you require disassembly to move the hood,
then follow the instructions in Appendix F. Then, follow the steps listed next to
remove the shipping skid from your unit.

1.

Remove the side panels by unscrewing the Phillips screws.

2.

Find the hardware (bolts, washers, nuts) that attach the fume hood to

the skid and remove the hardware. Some hardware is on the sides and
some is on the back.

The United
States
Interstate
Commerce
Commission
rules require
that claims
be filed with
the delivery
carrier
within fifteen
(15) days of
delivery.

!


Advertising