Labconco Protecto Ech Filtered Fume Hoods 183 Series 8' - Manuel (Page 187)

Appendix J: Setting Up the Protector Echo Floor-Mount
Product Service 1-800-522-7658 181
Original instructions
Header Installation for the Floor-Mounted
Filtered Hoods
The header is shipped separately in its protective packaging. To install, the header
is fastened to the corner covers by four #12 screws. Reach behind the corner posts
from the side and install the screws to support the header. See Figure J-6.
Figure J-6
#12 Screws
Corner Post
Header
Front Panel