Labconco Protecto Ech Filtered Fume Hoods 183 Series 8' Manuel d'utilisation
Page 148
Appendix E: gGuard
Product Service 1-800-522-7658
142
Original instructions
10. Next reboot the PC and when it comes up double click on the gGuard icon to
open it. You will then see this screen below.
11. Leave the server name as “local host” do not change this. You may fill out the
rest; company name, safety officer login, password, confirm password, and finally
the safety officer’s email address. Then press “next.”
12. Now you must activate your version of gGuard. Double click on the gGuard icon
and log in (using the name and password you set earlier. Then click on
SettingsSoftware settings then enter the serial number that is on the inside
cover of the plastic gGuard CD case. Once it is activated you can then add
hoods.
13. Click on Add/Delete a hoodAdd a hood then enter the IP address of the first
hood that you want to add then “connect.” You will see this screen when you
press “connect” below.