Labconco Protecto Ech Filtered Fume Hoods 183 Series 8' - Manuel (Page 39)

Chapter 3: Getting Started
Product Service 1-800-522-7658 33
Original instructions
Step 5 – Create new configuration.
After it reboots you will now see:
>Language
Date and Time
Maintenance Menu
Select
“Language”
by pressing
“Ok.”
Arrow down to
“English”
then press
“Ok.”
Now press
“X”
to return to the previous menu.
Arrow down to
“Date and Time”
press
“Ok.”
You should see:
>Date
Time
Format
Arrow down to “Format” then press “Ok” to set it to “MMDDYY.”
If the date and time are correct you may
“Save and Exit”
If date and/or time are incorrect, arrow up and down to each menu press
“Ok”
to
select it and correct it.
Then
“Save and Exit”
after your changes.
You should now see:
>Language
Date and Time
Maintenance Menu
Arrow down to
“Maintenance”
and select it by pressing
“Ok.”
You will see
“Hood Integration”
press
“Ok.”
“Create factory CFG”
press
“Ok.”
***Very important you should press
“Ok”
once and when it creates the CFG you
will see the following***:
“Discovered Hardware”
Fan(s) the # of fans that your hood has, either an M2, M3, M4, or M5
Electro (S): “Yes”
Semicon (S): “Yes”
Sash Sensor: “Yes”
Temperature Sensor: “Yes”