Labconco Protecto Ech Filtered Fume Hoods 183 Series 8' Manuel d'utilisation
Page 41
Chapter 3: Getting Started
Product Service 1-800-522-7658
35
Original instructions
Scan in your black RFID tags from your primary filters.
Place those RFID tags back on the primary filters.
Take off the RFID tags that are on your secondary filters only.
Scan in your black RFID tags from your secondary filters.
Place those RFID tags back on the secondary filters.
The
“0”
should now be the number of filters that you have. If not, then rescan them.
If it is not in the database, it will scan it in. If it is in the database, it will say
“Already in database.”
When you have the correct number of filters press
“Ok”
three times.
Reinsert your maintenance card press
“Ok.”
You should now see
“Enter Filter Lifetime”
365D
5M
730MAX
When commissioning a new hood or changing an Electro sensor, always
use the
Max of 730 days.
Now take the
“Filter X D”
from step 2 that you wrote down and
subtract it from 730.
For example,
85D
730
- 85
= 645
In the above example, the number you would enter would be 645 for the days.
Arrow down or up to get your number and then press
“Ok.”
You will now see:
Filter list
Total replacement
Partial replacement
Press
“X”
to return to the previous menu.
You should see:
Language
Date and Time
Filters