Rockwell Automation 1440-SDM02-01RA XM-124 Standard Dynamic Measurement Module - Manuel (Page 57)

Rockwell Automation Publication 1440-UM001C-EN-P - May 2014 57
Install the XM-124 Standard Dynamic Measurement Module Chapter 1
• An XM module enters Run mode automatically after the ADR scanner
restores the module’s configuration only if the module is in Run mode at
the time the configuration is saved to the scanner. If the module is in
Program mode when the configuration is saved, then the module remains
in Program mode after the configuration is downloaded by the ADR
scanner.
• The ADR scanner saves and restores only the configuration parameters
contained in the module’s EDS file. Some XM parameters are not included
in the EDS file because they are not supported by either the EDS
specification or the tools that read the EDS files, for example RSNetWorx
for DeviceNet software. These configuration parameters are not restored
with ADR.
Below is a list of the configuration parameters that are not included in the
EDS file and can not be saved or restored with ADR:
–
Channel Name
– Tachometer Name
– Alarm Name
– Relay Name
– All Triggered Trend related parameters
– All SU/CD Trend related parameters
– Custom Assembly structure
• The ADR and trigger group functions cannot be used together. A module
can have only one primary master so a module cannot be both configured
for ADR and included in a trigger group. The ADR scanner must be the
primary master for the modules configured for ADR. The XM-440
Master Relay module must be the primary master for modules included in
a trigger group.
Power Up the Module The module performs a self-test at powerup. The self-test includes a status
indicator test and a device test. During the status indicator test, the indicators are
turned on independently and in sequence for approximately 0.25 seconds.
The device test occurs after the Status Indicator test. The Module Status (MS)
indicator is used to indicate the status of the device self-test.
MS Indicator State Description
Flashing Red and Green Device self-test is in progress.