Rockwell Automation 1440-SDM02-01RA XM-124 Standard Dynamic Measurement Module - Manuel (Page 125)

Rockwell Automation Publication 1440-UM001C-EN-P - May 2014 125
CIP Objects Appendix B
Instance Attributes
Services
(1) The AlarmLimitMultiply output tag in RSLogix 5000 software can also set the Setpoint Multiplier switch. It does not overwrite this
service.
Table 41 - Discrete Input Object Instance Attributes
Attr ID
Access Rule
Name Data Type Description Semantics
3 Get Value BOOL Alarm Limit Multiplier 0 = Off
1 = On
199 Set Backdoor Service USINT Setting this attribute is equivalent
to requesting the specified service. Set to one of the following
values to perform the
specified service:
32
h
= Open
33
h
= Close
The virtual Setpoint
Multiplier switch can be
set with the
AlarmLimitMultiply output
tag in RSLogix 5000
software.
Table 42 - Discrete Input Object Services
Service Code
Class/Instance Usage Name Description
0E
h
Class/Instance Get_Attribute_Single Returns the contents of the specified
attribute.
10
h
Instance Set_Attribute_Single Sets the contents of the specified
attribute.
32
h
Instance Open Opens the virtual Setpoint Multiplier
switch
(1)
.
33
h
Instance Close Closes the virtual Setpoint Multiplier
switch
(1)
.