Rockwell Automation 1440-SDM02-01RA XM-124 Standard Dynamic Measurement Module - Manuel (Page 112)

112 Rockwell Automation Publication 1440-UM001C-EN-P - May 2014
Appendix A Status Indicators
Module Status (MS)
Indicators The following table describes the Module Status indicators.
Relay Indicator The following table describes the relay indicator.
Network Status (NS)
Indicator The following table describes the network status indicator.
Channel 1 and Channel 2
Status Indicators The following table describes the channel indicators.
State Probable Cause
Off No power applied to the module.
Alternating Red/Green Module performing power-up self-test.
Flashing Red • Application firmware is invalid or not loaded. Download firmware to the
module.
• Firmware download is currently in progress.
• The Node Address or Communication Rate DIP switches have been
changed and do not reflect the settings currently in use.
Solid Red An unrecoverable fault has occurred. The module may need to be repaired or
replaced.
Flashing Green Module operating in Program Mode, not performing its monitoring
functions.
Solid Green Module operating in Run Mode, performing its monitoring functions.
State Probable Cause
Off The relay is not activated.
Solid Red The relay is activated.
State Probable Cause
Off Module is not online.
• Module is autobauding.
• No power applied to the module; look at Module Status indicator.
Flashing Red One or more I/O connections are in the timed-out state.
Solid Red Failed communication (duplicate MAC ID or bus-off).
Flashing Green Module is online but no connections are currently established.
Solid Green Module is online with connections currently established.
State Probable Cause
Off • Normal operation within alarm limits on the channel.
• No power applied to the module. Look at Module Status indicator.
Solid Yellow An alarm associated with this channel is in Alert.
Solid Red An alarm associated with this channel is in Danger.
Flashing Red A transducer fault exists on the channel. The DC bias is outside the DC Low
and High Limits.