Rockwell Automation 1440-SDM02-01RA XM-124 Standard Dynamic Measurement Module - Manuel (Page 126)

126 Rockwell Automation Publication 1440-UM001C-EN-P - May 2014
Appendix B CIP Objects
Analog Input Point
(Class ID 0A
H
)
The Analog Input Point Object models simple analog measurements performed
by the Standard Dynamic Measurement Module.
Class Attributes
Instances
Instance Attributes
Table 43 - Analog Input Point Object Class Attributes
Attr ID
Access Rule
Name Data Type Description Semantics
1 Get Revision UINT Version of the implemented
object. 2
Table 44 - Analog Input Point Object Instances
Instance Description
1 Gap measurement for Channel 1
2 Gap measurement for Channel 2
3 Not 1X measurement for Channel 1
4 Not 1X measurement for Channel 2
5 SMAX magnitude of synchronized channels
6 SMAX phase of synchronized channels
7 Sum Harmonics measurement for Channel 1
8 Sum Harmonics measurement for Channel 2
9 Thrust Position Measurement for Channel 1
10 Thrust Position Measurement for Channel 2
11 gSE Overall measurement for Channel 1
12 gSE Overall measurement for Channel 2
13 Eccentricity measurement for Channel 1
14 Eccentricity measurement for Channel 2
Table 45 - Analog Input Point Object Class Attributes
Attr ID
Access Rule
Name Data Type Description Semantics
3 Get Value REAL
4 Get Status BOOL Indicates if a fault or alarm has
occurred. 0 = Operating without alarms or faults
1 = Alarm or fault condition exists. The
Value attribute may not represent the
actual field value.