Rockwell Automation 1440-SDM02-01RA XM-124 Standard Dynamic Measurement Module - Manuel (Page 128)

128 Rockwell Automation Publication 1440-UM001C-EN-P - May 2014
Appendix B CIP Objects
Class Attributes
Instances
There are 51 instances of this object
Table 47 - Parameter Object Class Attributes
Attr ID
Access Rule
Name Data Type Description Semantics
2 Get Max Instance UINT Maximum instance number of an
object in this class. Total number of parameter object
instances.
8 Get Parameter Class
Descriptor WORD Bits that describe the parameter. Bit 0 Supports Parameter Instances
Bit 1 Supports Full Attrib.
Bit 2 Must do nonvolatile store
Bit 3 Params in nonvolatile
9 Get Config. Assembly
Instance UINT Set to 0
Table 48 - Parameter Object Instances
Instance
Read
Only
Name Data Type Valid Values Default Value
1 No Transducer 1 Sensitivity Units USINT 0 = mil
1 = in/s
2 = g
3 = psi
4 = volts
5 = mm/s
6 = μm
7 = Pa
8 = mbar 0
2 No Transducer 2 Sensitivity Units USINT (same as above) 0
3 No Channel 1 Measurement Units USINT 0 = mil
1 = in/s
2 = g
3 = psi
4 = volts
5 = mm/s
6 = μm
7 = Pa
8 = mbar 0
4 No Channel 2 Measurement Units USINT (same as above) 0
5 No Starting Order for Channel 1Sum
Harmonics meas. USINT 0=1
1=2
2=3
3=4
4=5 3
6 No Starting Order for Channel 2 Sum
Harmonics measurement. USINT 1…5 2