Accessories – Lincoln Electric CLASSIC SVM194-A Manuel d'utilisation
Page 65
ACCESSORIES
C3.3
C3.3
CLASSIC® 300D & 300G
WIRE FEED OPTIONS
Wire Feed Module (K623-1) - Provides constant volt-
age (CV) output with improved arc stability for
Innershield welding. Excellent for MIG welding.
Recommended wire feeders are the LN-7, LN-23P and
LN-25. (Factory installed on the K1643-6).
LN-25 Wire Feeder (K449)-
Portable CC/CV unit for
flux-cored and MIG welding. Includes Gas Solenoid &
Internal Contactor. Requires Wire Feed Module.
Remote Voltage Control Kit for LN-25 (
K444-2)
Provides 25 ft. (7.5m) of remote output voltage control
and output jumper (2 and 4) for machines having 14
pin MS-type connector.
Magnum® 350 Innershield Gun (for LN-25)(K126-2)-
For self-shielded wire with 15 ft. (4.5m) cable. For
.062-3/32” (1.6-2.8mm) wire.
Magnum® 300 MIG Gun for LN-25 K1802-1 -
With
15 ft. (4.5m) cable. For .035”-.045” (0.9-1.2mm) gas
shielded (Includes Connector Kit).
LN-23P Wire Feeder (K316L-1)-
Portable CV unit for
Innershield pipe welding. Control cable operates con-
tactor inside Wire Feed Module for “cold” electrode.
Requires LN-23P Adapter Kit (K350-1) and Gun and
Cable Assembly.
LN-23P Adapter Kit (K350-1)-
Required to adapt LN-
23P to any Lincoln power source. Makes 14 pin con-
nection at power source.
Magnum® 250 Innershield Gun (for LN-23P) (K355-10)-
For lighter weight and easier handling. Rated 250
amps, 60% duty cycle. For .068 through 5/64” (1.7
through 2.0 mm) Innershield wire and includes
reduced speed switch. For pipe welding, an M11476
62° gun tube is recommended.
62° gun tube for PipeWelding (KP1909-1)-
Recommended modification for K355-X or K345-X
guns with 90° gun tubes. Compatible with K126-1,-2
K264-8 and K355-10.
Magnum Spool Gun
(K487-25)-Hand held semiauto-
matic wire feeder requires SG Control Module. 25 ft.
(7.6m)length.
SG Control Module (K488) (For Magnum Spool
Gun) -
The interface between the power source and
the spool gun. Provides control of wire speed and gas
flow.
Input Cable
(K691-10) ( For SG Control Module) -
For Lincoln engine drives with 14-pin MS-type connec-
tion provides separate 115V NEMA receptacle and out-
put stud connections. 10 ft. (3.1m)length.