Accessories – Lincoln Electric CLASSIC SVM194-A Manuel d'utilisation
Page 21
ACCESSORIES
C1.3
C1.3
CLASSIC® 300D & 300G
Wire Feed Module (K623-1) - Provides constant volt-
age (CV) output with improved arc stability for
Innershield welding. Excellent for MIG welding.
Recommended wire feeders are the LN-7, LN-23P and
LN-25. (Factory installed on the K1643-2).
LN-25 Wire Feeder K449-
Portable CC/CV unit for
flux-cored and MIG welding. Includes Gas Solenoid &
Internal Contactor. Requires Wire Feed Module.
Remote Voltage Control Kit for LN-25
K444-2
Provides 25 ft. (7.5m) of remote output voltage control
and output jumper (2 and 4) for machines having 14
pin MS-type connector.
Magnum® 350 Innershield Gun (for LN-25)K126-2-
For self-shielded wire with 15 ft. (4.5m) cable. For
.062-3/32” (1.6-2.8mm) wire.
Magnum® 200 MIG Gun (for LN-25))K497-3-
With
15 ft. (4.5m) cable. For .025 (0.6m) wire.
Magnum Gun Connector KiT-
Connects Magnum 200
MIG gun to LN-25 Wire Feeder.
LN-23P Wire Feeder K316L-1-
Portable CV unit for
Innershield pipe welding. Control cable operates con-
tactor inside Wire Feed Module for “cold” electrode.
Requires LN-23P Adapter Kit (K350-1) and Gun and
Cable Assembly.
LN-23P Adapter Kit K350-1-
Required to adapt LN-
23P to any Lincoln power source. Makes 14 pin con-
nection at power source.
Magnum® 250 Innershield Gun (for LN-23P) K355-
10-
For lighter weight and easier handling. Rated 250
amps, 60% duty cycle. For .068 through 5/64” (1.7
through 2.0 mm) Innershield wire and includes
reduced speed switch. For pipe welding, an M11476
62° gun tube is recommended.
62° gun tube for Pipe Welding KP1909-1-
Recommended modification for K355-X or K345-x
guns with 90° gun tubes. Compatible with K126-1,-
2,K264_8 and K355-10.
SPOOL GUN WELDER
Magnum Spool Gun K487-25-
Hand held semiauto-
matic wire feeder requires SG Control Module. 25 ft.
length.
SG Control Module K488-
The interface between the
power source and the spool gun. Provides control of
wire speed and gas flow.
Input Cable K691-10.-
For Lincoln engine drives with
14-pin MS-type connection, separate 115V NEMA
receptacle and output stud connections. 10 ft.
length.