Troubleshooting and repair – Lincoln Electric CLASSIC SVM194-A Manuel d'utilisation
Page 201
GENERATOR FRAME
REMOVAL AND REPLACEMENT (continued)
TROUBLESHOOTING AND REPAIR
F-79
F-79
CLASSIC® 300D & 300G
FIGURE F.15 – FRAME MOUNTING DETAILS
ENGINE/GENERATOR
MOUNTING HOLES
ROPE SLING
See Figure F.15 for steps 17 - 20.
17. With the 3/4" wrench, remove the frame
mounting bolts, nuts and spacers from the
feet of the generator frame.
18. With the rope sling around the generator
frame, carefully lift the frame and engine
assembly a small distance. Slide the wood
or steel block under the engine adapter
plate.
19. With the 9/16" wrench, remove the bolts
mounting the engine to the generator frame.
20. Using the rope sling and pry bars, carefully
lift and “wiggle” the generator frame away
from the engine and armature assembly. Be
careful to support the generator frame as
you remove it.
Replacement
21. Support the generator frame with the rope
sling. Mount the generator frame to the
engine and armature assembly. Before
removing the rope sling, be careful to sup-
port the generator frame with the wood or
steel block under the engine adapter plate.
With the 9/16" wrench, install the bolts that
attach the generator frame to the engine.
22. With the 3/4" wrench, install the frame
mounting bolts, nuts, and spacers to the feet
of the generator frame. See Figure F.15.
23. Install the case front to the welder frame.
24. Connect the cables to the selector switch
according to how you labeled them during
disassembly. See the Wiring Diagram if nec-
essary.
25. Reconnect the blue and brown leads at the
in-line connectors.
26. Install the copper strap/reed switch assem-
bly to the negative output terminal.