Analog Way Octo Vue - OVP831 - Manuel (Page 17)

OCTO VUE / QUATTRO VUE Chapter 2 : STARTING (continued)
PAGE 17
2-4. INPUTS #2 to 8 DESCRIPTION
CONNECTION:
You can connect to these inputs one of the following source:
• A composite video source.
NOTE: The input #7 (#4 on the QVP421) can accept a composite video source on its BNC connector. The input #8
can accept a composite video source on its RCA connector.
• A S.VIDEO source.
NOTE: The input #7 (#4 on the QVP421) can accept a S.VIDEO source on its BNC connectors. The input #8 can
accept a S.VIDEO source on its 4-pin mini DIN.
• A Component video source.
• A HD-YUV source.
• A RGBS video source.
• An analog computer source (RGBHV, RGsB, RGBS).
HD15 PIN ASSIGNMENT:
SIGNAL COMPUTER (analog) VIDEO RGB/S YUV & HD-YUV S.VIDEO (Y/C) COMPOSITE VIDEO
PIN 1 RED. RED. Cr / Pr. C (chrominance).
PIN 2 GREEN. GREEN. Y. Y (luminance). VIDEO (NTSC, PAL...)
PIN 3 BLUE. BLUE. Cb / Pb.
PIN 6 RED return. RED return. Cr / Pr return. C return.
PIN 7 GREEN return. GREEN return. Y return. Y return. Return.
PIN 8 BLUE return. BLUE return. Cb / Pb return.
PIN 10 GND. GND.
PIN 13 H sync or C sync (S). C sync (S).
PIN 14 V sync.
HD15 female connector of the device.
AUDIO SOURCE:
-You can connect an unbalanced stereo audio source on a jack 3.5 connector (input #2 & 8).
-You can connect an unbalanced stereo audio source on a MCO connector (input #3 to 6).
-You can connect an unbalanced or balanced stereo audio source on a MCO connector (input #7).
2-5. OUTPUTS DESCRIPTION
PREVIEW OUTPUT:
You can connect to this output an analog control display device. The preview output format is XGA at 60 Hz.
MAIN ANALOG OUTPUT:
You can connect to this output an analog display device.
MAIN DVI OUTPUT:
You can connect to this output an analog* or digital display device.
* OVX831, OVF831 & OVP831.
DVI-I PIN ASSIGNMENT (OVX831, OVF831, OVP831):
Pin
Function
Pin
Function
Pin
Function
1
TMDS Data 2-
9
TMDS Data 1-
17
TMDS Data 0-
2 TMDS Data 2+ 10 TMDS Data 1+ 18 TMDS Data 0+
3 TMDS Data 2 Shield 11 TMDS Data 1 Shield 19 TMDS Data 0 Shield
4
Not used.
12
Not used.
20
Not used.
5 Not used. 13 Not used. 21 Not used.
6
DDC Clock
14
+ 5V (Power)
22
TMDS Clock Shield
7 DDC Data 15 Ground for (+5V) 23 TMDS Clock+
8 Analog Vertical Sync. 16 Hot plug detect. 24 TMDS Clock-
C1 Analog Red video (or Cr / Pr or C)
C2
Analog Green Video (or Y or composite video)
C3 Analog Bleu Video (or Cb / Pb)
C4
Analog Horizontal Sync (or composite sync)
C5 Analog Common Ground Return
DDC = Display Data Channel.
TMDS = Transition Minimized Differential Signal.
5
6
1
15
10
11
8 1
9 16
24 17
C1 C2
C3 C4
C5