Casio FX-CG10 - Manuel (Page 582)

20100801 20100801
ε
-36
Using the Graph Analysis Tools to Graph Data
k Selecting an Analysis Mode and Drawing a Graph
This section contains a detailed procedure that covers all steps from selecting an analysis
mode to drawing a graph.
Note
• Step 4 through step 7 are not essential and may be skipped, if you want. Skipping any step
automatically applies the initial default values for its settings.
• If you skip step 2, the default analysis mode is the one whose name is displayed in the top
line of the Graph Mode screen.
• To select an analysis mode and draw a graph
1. On the E-Con2 main menu (page
ε
-1), press
5(GRAPH).
• This displays the Graph Mode screen.
2. Press
3(MODE), and then select the analysis mode you want from the menu that
appears.
To do this:
Perform this menu
operation: To select this
mode:
Graph three sets of sampled data
simultaneously
[Norm] Graph Analysis
Graph sampled data along with its first
and second derivative graph
[diff] d/dt & d 2 /dt 2
Display the graphs of different sampled
data in upper and lower windows for
comparison
[COMPARE]
→ [GRAPH]
Compare Graph
Output sampled data from the speaker,
displaying graph of the raw data in
the upper window and the output
waveform in the lower window
[COMPARE]
→ [Sound]
Compare Sound
Display the graph of sampled data
in the upper window and its first
derivative graph in the lower window
[COMPARE]
→ [d/dt]
Compare d/dt
Display the graph of sampled data
in the upper window and its second
derivative graph in the lower window
[COMPARE]
→ [d
2 /dt 2 ] Compare d 2 /dt 2
• The name of the currently selected mode appears in the top line of the Graph Mode
screen.
Analysis mode name