Dell 5130cdn Color Laser Printer - Manuel (Page 62)

6. Press button until PIN Code is highlighted, and then press (Set) button.
7. Write down the 8-digit PIN code displayed on the first line of the panel display or press button until Print PIN
Code
is highlighted, and then press (Set) button.
The PIN code is printed.
8. Ensure Start Configuration is highlighted, and then press (Set) button.
9. Ensure the message Please wait Wireless Setting is displayed, and then enter the PIN code displayed on the
Step 7 into the wireless LAN access point (Registrar).
NOTE: For WPS operation on the wireless LAN access point, refer to the manual supplied with the wireless LAN
access point.
10. When the WPS operation is successful and the printer is rebooted, wireless LAN connection is completed.
WPS-PBC
NOTE: WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register
devices required for wireless configuration, by pressing the button provided on the access point via wireless routers,
and then performing WPS-PBC setting on the operator panel. This setting is available only when the access point
supports WPS.
1. Press the Menu button.
2. Press button until Admin Menu is highlighted, and then press (Set) button.
3. Ensure Network is highlighted, and then press (Set) button.
4. Press button until Wireless Setup is highlighted, and then press (Set) button.
5. Press button until WPS is highlighted, and then press (Set) button.
6. Ensure Push Button Control is highlighted, and then press (Set) button.
7. Press button until PBC Start is highlighted, and then press (Set) button.
8. Press button until Start is highlighted, and then press (Set) button.
9. Ensure the message Please wait Wireless Setting is displayed, and then start the WPS-PBC on the wireless
LAN access point (Registrar), within two minutes of the Step 8 operation.
NOTE: For WPS operation on the wireless LAN access point, refer to the manual supplied with the wireless LAN
access point.
10. When the WPS operation is successful and the printer is rebooted, wireless LAN connection is completed.
USB
1. Insert the Drivers and Utilities CD provided with the printer in your computer. The Easy Setup Navigator file
launches automatically.
2. Click the Wireless Configuration button on the Easy Setup Navigator window.
The Wireless Configuration window opens.