Dell 5130cdn Color Laser Printer - Manuel (Page 32)

If you cannot acquire the printer information using the Get Information from
Printer automatically, try the following procedure:
1. Click the Device Settings tab, and then select any of the available trays from
the Paper Tray Configuration.
2. Click Apply, and then click OK.
3. Close the Printers and Faxes dialog box.
Windows 2000 1. Click Start ® Settings® Printers.
2. Right-click the printer that uses the PS driver, and then select Properties
from the displayed list.
3. Click the Configuration tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Click the Device Settings tab, and then confirm the paper tray configuration
under Installable Options.
6. Close the Printers dialog box.
If you cannot acquire the printer information using the Get Information from
Printer automatically, try the following procedure:
1. Click the Device Settings tab, and then select any of the available trays from
the Paper Tray Configuration.
2. Click Apply, and then click OK.
3. Close the Printers dialog box.
Mac OS
®
X 10.5.x
1. Select the Print & Fax in System Preferences.
2. Select the printer in Printers list, and click Options & Supplies.
3. Select Driver, select the options that have been installed on the printers, and
then click OK.
Mac OS X 10.3.x/10.4.x 1. Select the printer from the Printer List screen in Print Center (or Printer
Setup Utility).
2. Click Printers on the Print Center (or Printer Setup Utility) menu bar, and
select Show Info.
3. Select Installable Options, and select the options that have been installed on
the printer, and then click Apply Changes.
Mac OS 9 1. Select a desktop printer related to the model.
2. Click Printing on the System menu bar, and select Change Setup.
3. Select Paper Tray Configuration on the Change menu.
4. Select the option that has been installed on the printer on the To menu, and
then click OK.
Installing an Output Expander
CAUTION: If you install an output expander after setting up the printer, be sure to turn off the printer,
unplug the power cable, and disconnect all cables from the back of the printer before completing these
tasks.
CAUTION: Always grasp and hold the output expander as instructed when moving the expander. Not
doing so could cause you to drop the output expander, resulting in personal injury.
CAUTION: After installing the output expander, visually check to ensure that the expander has been
connected correctly. Improper installation could cause the output expander to detach and fall, causing
personal injury.
CAUTION: When moving the printer, disconnect the output expander from the printer. Not doing so
could cause the output expander to detach and drop, resulting in personal injury.
1. Turn off the printer and unplug the power cable. Then, disconnect all cables from the back of the printer.
2. Remove all packing material from the output expander, except the cardboard cover. Do not remove the protective
cardboard cover until installation is complete.