Dell 5130cdn Color Laser Printer - Manuel (Page 191)

1000m
Specifies the altitude of the location where the printer is installed. 2000m
3000m
4000m
Initialize PrintMeter
Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to 0.
Reset Defaults
Purpose:
To initialize the NV (non-volatile) memory. After executing this function and rebooting the printer, all the menu
parameters, except the parameters for the network, are reset to their default values.
Clear Storage
Purpose:
To clear all files stored as Secure Print, Mailbox Print, Proof Print and Stored Print in the RAM disk or the optional hard
disk.
Values:
All Clear
Deletes all files stored as Secure Print, Mailbox Print, and Proof Print in the RAM disk or the optional
hard disk.
Secure
Document
Deletes all files stored as Secure Print and Mailbox Print in the RAM disk or the optional hard disk.
Stored
Document
Clears all files stored as Stored Print in the RAM disk or the optional hard disk.
NOTE: This item is available only when the RAM disk is on or the optional hard disk is installed.
Format HDD
Purpose:
To initialize the optional hard disk.
NOTE: The Format HDD menu is displayed only when an optional hard disk is installed on your printer.
Non-Dell Toner
Purpose:
To specify whether or not to use another manufacturer's toner cartridge.
NOTE: Before you use another manufacture's toner cartridge, be sure to restart the printer.
NOTICE: Use of a non-Dell toner cartridge may result in some of the printer's functions to be unavailable, a
reduction in print quality, or deterioration of printer's reliability. Use of a new Dell brand toner cartridge is
recommended for your printer. The Dell warranty does not cover any problems caused by the use of any accessory,
part, or component that is not supplied by Dell.
Values: