Dell 5130cdn Color Laser Printer - Manuel (Page 399)

Does this solve your problem?
recommended one.
6
Check if the wrinkle appeared within the square
whose each edge is 30 mm inside the four sides of
the envelope.
The wrinkle had appeared
within the allowable range.
You can use the envelope
you are using.
Go to action 7.
7
Change the envelope with another one and try
again.
Does this solve your problem?
The task is complete. Contact Dell.
8
If the wrinkle appeared on the envelope flap,
confirm the type of the tray in which the envelope
is set first. Is it the MPF?
Go to action 9.
(Tray 1)
Go to action 11.
9
Press the envelope to expel any remaining air in it.
Is the problem reduced or recovered?
The task is complete. Go to action 10.
10
Use Tray 1 to feed the envelope.
Does this solve your problem?
The task is complete. Go to action 11.
11
Change the envelope with another one and then
try again.
Is the problem reduced or recovered?
The task is complete.
The occurrence of wrinkles on
envelope flaps does not indicate
printer failure. There is no
problem to use the printer.
Damage on the leading edge of paper
Action Yes No
1
When you use the MPF, reverse the paper and then try again.
When you use any of the Tray 1 to 5, change the paper and then try again.
Does this solve your problem?
The task is complete.
(MPF)
Go to action 2.
(Tray 1 to 5)
Contact Dell.
2
Change the paper with another one and then try again.
Does this solve your problem?
The task is complete. Go to action 3.
3
Use any of the Tray 1 to 5 in place of the MPF.
Does this solve your problem?
The task is complete. Contact Dell.
Jam/Alignment Problems
NOTE: Some of the following procedures that use the Tool Box can also be performed using the operator panel or
Dell Printer Configuration Web Tool. For information on how to use the operator panel and Dell Configuration Web
Tool, see " Understanding the Printer Menus " and " Dell Printer Configuration Web Tool ."
The top margin is incorrect