Dell 5130cdn Color Laser Printer - Manuel (Page 247)

Before Using the UX Filter
Check the following items before using the UX filter.
Before setting up the workstation, set up the printer as follows.
1. Make sure the lpd port is working or not when using the network environment. If the lpd port is not working, set
LPD
to On on the operator panel. (Mandatory) See " Protocol " for more information.
When a parallel or USB port is to be used, make sure these are working. (Mandatory)
2. Set up IP address and subnet mask when the printer is used in the network environment. (Mandatory)
3. Make TBCPFilter function available if TBCPFilter function is installed on the printer. See " Adobe Protocol " for more
information.
Installing the UX Filter
Before Installation
The following are required for the installation.
Supported operating system is described in " Page Description Language (PDL)/Emulation, Operating System, and
Interface ."
Disk capacity: 20 MB of free disk space required, including temporary working space for installation.
Log on as a root account to perform the operation here. If you have no root privilege, contact your system
administrator.
Output printer must be registered in the workstation before using UX filter. (HP-UX)
Use sam
command for registration of output printer.
For more information, see the HP-UX related manual.
Files Added by the Installation
The following files will be added when the UX filter is installed.
Solaris
Directory
File name Contents
/usr/local/dellbin5130
txt2ps2 Text conversion utility
sunras2ps2 SunRaster conversion utility
tiff2ps2 TIFF conversion utility
xwd2ps2 XWD conversion utility