Dell 5130cdn Color Laser Printer - Manuel (Page 329)

" Cleaning Inside the Printer ."
Replacing the Fuser
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
CAUTION: Before performing any of the following procedures, read and follow the safety instructions in
your Product Information Guide provided with your product.
CAUTION: To prevent electric shock, always turn off the printer and disconnect the power cable from
the grounded outlet before performing maintenance.
NOTE: Video instructions are also available in the Maintenance Guide.
The Maintenance Guide is included in the Drivers and Utilities CD provided with your printer.
Click start ® Run, and then type D:\MaintenanceGuide\MaintenanceGuide.exe (where D is the drive letter of
your CD), and then click OK.
Dell fuser is available only through Dell. To order by phone, see " Contacting Dell ."
It is recommended to use a Dell fuser for your printer. Dell does not provide warranty coverage for problems caused by
using accessories, parts, or components not supplied by Dell.
Removing the Fuser
CAUTION: To prevent electric shock, always turn off the printer and disconnect the power cable from
the grounded outlet before performing maintenance.
CAUTION: To avoid burns, do not replace the fuser immediately after printing. The fuser becomes
extremely hot during use.
1. Turn off the printer and wait for 30 minutes before removing the fuser.
2. Raise the latch on the handle of the right hand cover to open the cover.