Dell 5130cdn Color Laser Printer - Manuel (Page 390)

Action Yes No
1
The toner cartridges may be low or need to be replaced. Confirm the
amount of toner in each toner cartridge.
1. Check the toner level in the Status tab in the Status Monitor.
2. Replace the toner cartridges as necessary.
Does this solve your problem?
The task is complete.
Go to
action
2.
2
If you are using non-Dell brand toner cartridges, enable the Non-Dell
Toner option.
1. Launch the Dell Printer Configuration Web Tool by entering
your printer's IP address in your web browser. (If you do not know
how to launch the Dell Printer Configuration Web Tool, see " Dell
Printer Configuration Web Tool .")
2. Select Printer Settings.
3. Click the Printer Maintenance tab.
4. Select Non-Dell Toner.
5. Ensure that the On check box is not selected.
Does this solve your problem?
The task is complete.
Go to
action
3.
3
Disable the Toner Saving Mode in the printer driver.
1. On the Advanced tab, ensure that the Toner Saving Mode check
box is not selected.
Does this solve your problem?
The task is complete.
Go to
action
4.
4
The print media surface may be uneven. Try changing the Paper Type
setting in the printer driver. For example, change the plain paper to plain
thick.
1. On the Paper/Output tab, change the Paper Type setting.
Does this solve your problem?
The task is complete.
Go to
action
5.
5
Verify that the correct print media is being used. See " Supported Paper
Sizes ." If not, use the print media recommended for the printer.
Does this solve your problem?
The task is complete.
Go to
action
6.
6
Ensure that eight yellow ribbons are correctly removed from the drum
cartridge. See " Replacing the Drum Cartridges ." If not, remove the
ribbons.
Does this solve your problem?
The task is complete.
Go to
action
7.
7
Replace the drum cartridge if you have a spare.
1. Replace the drum cartridge. See " Replacing the Drum Cartridges ."
2. After you replace the drum cartridge, start Tool Box. For how to
start Tool Box, see " Understanding Your Printer Software ."
The Tool Box opens.
3. Select Chart Print from the left list.
4. Click the 4 Colors Configuration Chart button.
The 4 Colors Configuration Chart is printed.
Does this solve your problem?
The task is complete. (The drum
cartridge you are using has
been damaged. Replace it with
a new one.)
Contact
Dell.
Streaks appear on the output.