Other problems, Contacting service, Compile exit snr off jam – Dell 5130cdn Color Laser Printer Manuel d'utilisation

Page 410: Set eject jam

Advertising
background image

Compile Exit SNR OFF Jam

Action

Yes

No

1

Remove the print media left in the H Transport Unit.

Does this solve your problem?

The task is complete. Contact Dell.

Set Eject Jam

Action

Yes

No

1

If using non-recommended print media, use the print media recommended for

the printer.

Does this solve your problem?

The task is

complete.

Go to action

2.

2

Check if the print media on the tray obstruct the output slot.

Remove the print media on the tray.

Does this solve your problem?

The task is

complete.

Go to action

3.

3

Check if the print media is curled.

Uncurl the print media and then set it again.

Does this solve your problem?

The task is

complete.

Go to action

4.

4

Wipe the separator rollers in tray 1 with a cloth moistened with water.

Does this solve your problem?

The task is

complete.

Contact Dell.

Other Problems

Problem

Action

Condensation

has occurred

inside the

printer.

This usually occurs within several hours after you heat the room in winter. This also occurs when the

printer is operating in a location where relative humidity reaches 85% or more. Adjust the humidity

or relocate the printer to an appropriate environment.

Contacting Service

When you call for printer service, be prepared to describe the problem you are experiencing or the error message on the

display.

You need to know your printer's model type and serial number. See the label located inside the side door of your printer.

Back to Contents Page

Advertising