Dell 5130cdn Color Laser Printer - Manuel (Page 175)

Values:
Auto* Detects the Ethernet settings automatically.
10Base Half Uses 10 base-T half-duplex.
10Base Full Uses 10 base-T full-duplex.
100Base Half Uses 100 base-TX half-duplex.
100Base Full Uses 100 base-TX full-duplex.
1000Base Full Uses 1000 base-T full-duplex.
Status
Purpose:
To display the information on the wireless signal strength. Any change cannot be made on the operator panel to improve
the status of the wireless connection.
Values:
Good Indicates good signal strength.
Acceptable Indicates marginal signal strength.
Low Indicates insufficient signal strength.
No Reception Indicates that no signal is received.
NOTE: This item is available only when connecting the printer with a wired network.
Wireless Setup
Purpose:
To configure the wireless network interface.
Values:
Manual
Setup
Enter
Network
(SSID)
Specify a name to identify the wireless network. Up to 32 alphanumeric characters can be
entered.
Infra-
structure
Select when you configure the wireless setting through the access point such as a wireless
router.
No
Security
Specify No Security to configure the wireless setting without specifying a security
method from WEP, WPA-PSK-TKIP, and WPA-PSK-AES.
WEP Key
Entry
(64Bit)
Specify the WEP 64bit Key to use through the wireless network. Up to 10
hexadecimal characters can be entered.
Transmit
Key
Specify the transmit key from WEP Key 1, WEP Key 2, WEP Key
3, and WEP Key 4.
WEP Key
Entry
(128Bit)
Specify the WEP 128bit Key to use through the wireless network. Up to 26
hexadecimal characters can be entered.
Transmit
Key
Specify the transmit key from WEP Key 1, WEP Key 2, WEP Key
3, and WEP Key 4.
Infra-
structure
WPA-PSK-
TKIP
Select to configure the wireless setting with the security method of WPA-PSK-
TKIP.
Pass
Phrase
Specify the passphrase of alphanumeric characters from 8 to 63 only
when WPA-PSK-TKIP is selected for Encryption.
WPA2-
PSK-AES
Select to configure the wireless setting with the security method of WPA2-PSK-
AES.
Pass
Phrase
Specify the passphrase of alphanumeric characters from 8 to 63 only
when WPA-PSK-AES is selected for Encryption.