Dell 5130cdn Color Laser Printer - Manuel (Page 307)

Dark 1
0
Normal
-1
Light 1
-2
Light 2
-3
Light 3
-Cb
Option value must be specified in the following order:
Cyan low density, Cyan medium density, Cyan high density, Magenta low density, Magenta medium density,
Magenta high density, Yellow low density, Yellow medium density, Yellow high density, Black low density,
Black medium density, Black high density
If no value is specified, it is treated as "0"(Normal).
For example, if you want to specify "Light 2" for Cyan medium density, "Dark 3" for Yellow high density, and
"Dark 2" for Black low density, it can be specified using either of the following:
-Cb=0:-2:0:0:0:0:0:0:+3:+2:0:0
-Cb=:-2:::::::+3:+2::
-Sl=mode
Specifies staple settings.
Available staple option values are as follows:
0
Off
1
On
This option is available only when the optional output expander is installed.
-Os=mode
Specifies offset settings.
Available offset option values are as follows:
0
Auto
1
Offset per Set (Offsets each copy before printing the next copy.)
2
Offset per Job (Offsets each copy per paper job you specify.)
This option is available only when the optional output expander is installed.
-Lh=mode
Specifies letterhead duplex mode settings.
When letterhead duplex mode is enabled, a print sheet is always fed through duplex feeding path in a printer. As
the result, a user can set sheets without caring about sheet orientation in an input slot.
Available Letterhead duplex mode values are as follows:
0
Off
1
On
2
Auto