Dell 5130cdn Color Laser Printer - Manuel (Page 395)

Does this solve your problem?
Fog
Action Yes No
1
Replace the drum cartridge if you have a spare.
1. Replace the drum cartridge. See " Replacing the
Drum Cartridges ."
2. After you replace the drum cartridge, start Tool Box.
For how to start Tool Box, see " Understanding Your
Printer Software ."
The Tool Box opens.
3. Select Chart Print from the left list.
4. Click the 4 Color Configuration Chart button.
The 4 Color Configuration Chart is printed.
Does this solve your problem?
The task is complete. (The drum cartridge you
are using has been damaged. Replace it with a
new one.)
Contact
Dell.
Bead-Carry-Out (BCO)
Action Yes No
1
If the printer is installed in a high altitude location, set the altitude of the
location.
1. Launch the Dell Printer Configuration Web Tool by entering
your printer's IP address in your web browser. (If you do not know
how to launch the Dell Printer Configuration Web Tool, see " Dell
Printer Configuration Web Tool ".)
2. When the Dell Printer Configuration Web Tool starts, select Printer
Settings.
3. Click the Printer Maintenance tab.
4. Click Adjust Altitude on the Printer Maintenance tab.
5. Select the value close to the altitude of the location where the
printer is installed.
Is the problem recovered?
The task is complete.
Go to
action
2.
2
Replace the drum cartridge if you have a spare.
1. Replace the drum cartridge. See " Replacing the Drum Cartridges ."
2. After you replace the drum cartridge, start Tool Box. For how to
start Tool Box, see " Understanding Your Printer Software ."
The Tool Box opens.
The task is complete. (The drum
cartridge you are using has Contact