Dell 5130cdn Color Laser Printer - Manuel (Page 235)

Contact Support
Env. Mode Error
010-910
Open Right Hand Cover
and make a Envelope
Lever the normal
position.
Close Right Hand Cover
The printer is in the envelope mode when
you print on plain paper.
Open the right hand cover, and then lift up the
envelope lever to clear the envelope mode.
See " Loading an Envelope in the MPF ."
016-XXX
Certificate Fail
Init Certificate
Are You Sure?
Certification error has occurred.
Inquire of your system administrator to re-
configure the security settings.
Contact Dell if this message appears repeatedly.
See " Contacting Dell ."
016-316
Restart Printer
Reseat Memory
Contact Support
The printer detected an unsupported
memory module in the memory slot.
Remove the unsupported memory module. If this
does not solve the problem, contact Dell.
See " Contacting Dell ."
016-318
Restart Printer
Reseat Memory
Contact Support
The memory module is not fully inserted
in the slot.
Remove the memory module from the slot, and
then reinsert it. If this does not solve the
problem, contact Dell.
See " Contacting Dell ."
016-338
Restart Printer
Reseat Wireless
Contact Support
An error occurred in the wireless adapter.
Turn the printer off and on. Ensure the following:
The wireless adapter is securely inserted in the
slot on the control board.
Unauthorized USB devices are not used.
If this does not solve the problem, contact Dell.
See " Contacting Dell ."
Invalid ID
016-383
Data Violation
Press
An error occurred because an
invalid firmware is installed.
Press (Set) button.
Contact Dell if this message appears repeatedly.
See " Contacting Dell ."
Range Chk Error
016-384
Data Violation
Press
In downloading the firmware, the address
of the writing destination is inaccurate.
Press (Set) button.
Contact Dell if this message appears repeatedly.
See " Contacting Dell ."
Header Error
016-385
Data Violation
Press
In downloading the firmware, the header
information of a download file is
inaccurate.
Press (Set) button.
Contact Dell if this message appears repeatedly.
See " Contacting Dell ."
Check Sum Error
016-386
Data Violation
In downloading the firmware, the
checksum of a download file is
inaccurate.
Press (Set) button.
Contact Dell if this message appears repeatedly.