Dell 5130cdn Color Laser Printer - Manuel (Page 119)

Values:
Plain
(60 to 90 gsm)
Sets the temperature settings for the fuser for plain paper within the range of -6 to 6.
Plain Thick
(80/90 to 105 gsm) Sets the temperature settings for the fuser for thick plain paper within the range of -6 to 6.
Transparency Sets the temperature settings for the fuser for transparencies within the range of -6 to 6.
Covers
(106 to 163 gsm)
Sets the temperature settings for the fuser for cover paper within the range of -6 to 6.
Covers Thick
(164 to 216 gsm)
Sets the temperature settings for the fuser for thick cover paper within the range of -6 to 6.
Label Sets the temperature settings for the fuser for labels within the range of -6 to 6.
Coated
(106 to 163 gsm)
Sets the temperature settings for the fuser for coated paper within the range of -6 to 6.
Coated Thick
(164 to 216 gsm)
Sets the temperature settings for the fuser for thick coated paper within the range of -6 to 6.
Envelope Sets the temperature settings for the fuser for envelopes within the range of -6 to 6.
Recycled Sets the temperature settings for the fuser for recycled paper within the range of -6 to 6.
Auto Registration Adjustment
Purpose:
To specify whether to automatically perform color registration adjustment.
Color Registration Adjustments
Purpose:
To specify whether to manually perform color registration adjustment.
Manual Color Registration Adjustments are required such as when the printer is initially installed and after the printer is
moved.
NOTE: The Color Registration Adjustments feature can be configured when Auto Registration Adjustment is
set to Off.
Values:
Auto
Correct
Click Start to Automatically performs color registration correction.
Color
Regi
Chart
Click Start to print a color registration chart. The color registration chart prints a lattice pattern of yellow,
magenta, and cyan lines. On the chart, find the values on the right side that are next to the straightest lines
for each of the three colors. If the value for the straightest line is 0, color registration adjustment is not
required. If the value for the straightest line is any value other than 0, specify the adjustment values under
Color Registration Adjustments.
Enter
Number
Specifies lateral (perpendicular to paper feed direction) color adjustment values individually for LeftYellow,
LeftMagenta, LeftCyan, RightYellow, RightMagenta and RightCyan.
Adjust Altitude
Purpose:
To specify the altitude of where the printer is located because it affects print quality.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performed
by specifying the altitude of the location where the printer is being used.