Exporting a digital certificate – Dell 5130cdn Color Laser Printer Manuel d'utilisation
Page 222
See "
Dell Printer Configuration Web Tool
."
2. Select Print Server Settings.
3. Click the Security tab.
4. Select SSL/TLS.
5. Click the Certificate Management button to display the Certificate Management page.
NOTE:
The Certificate Management button is displayed only when the optional hard disk is installed and is
set to On for encryption.
6. Select the category from the Category list.
7. Select the purpose of use from the Certificate Purpose list.
8. Click the Display the List button to display the Certificate List page.
NOTE:
If the list includes more than 20 certificates, press the Next button to display the next page.
9. Select the certificate to be deleted.
10. Click the Certificate Details button to display the Certificate Details page.
11. To delete the selected certificate, press the Delete button at the upper- right corner.
NOTE:
When a certificate is deleted, the features associated with the deleted certificate are disabled. To
delete a certificate being used, either set the feature to OFF in advance or switch the association to another
certificate, and then switch to another operation mode if possible before deleting the certificate.
For an SSL Server, switch to another certificate such as a self-signed certificate.
For an SSL Client, set the LDAP-SSL/TLS setting to OFF.
For IPsec, change the IKE setting to Pre-Shared Key or set the feature to OFF.
For Wireless LAN, change the Wireless Security setting to other than WPA-Enterprise before deleting the
certificate.
Exporting a Digital Certificate
NOTE:
Since the secret key is not exported, an imported PKCS#12 format certificate can be exported only as a
PKCS#7 certificate.
1. Launch Dell Printer Configuration Web Tool.
a. Open the web browser.
b. Enter the IP address of your printer in the web browser.
See "
Dell Printer Configuration Web Tool
."
2. Select Print Server Settings.
3. Click the Security tab.
4. Select SSL/TLS.
5. Click the Certificate Management button to display the Certificate Management page.
NOTE:
The Certificate Management button is displayed only when the optional hard disk is installed and is set to
On for encryption.