When using the operator panel, Colortrack mode, No account user print – Dell 5130cdn Color Laser Printer Manuel d'utilisation

Page 211: No-account user password, Re-enter no-account user password, Colortrack error report

Advertising
background image

When Using the Operator Panel

You can specify only the settings of ColorTrack Mode, No Account User Print, and ColorTrack Error Report using

the operator Panel.

1. Press Menu button.

2. Press

button until Admin Menu is highlighted, and then press

(Set) button.

3. Press

button until System Settings is highlighted, and then press

(Set) button.

4. Press

button until ColorTrack Mode is highlighted, and then press

(Set) button.

5. Press

button until External Mode is highlighted, and then press

(Set) button.

6. Press Cancel or

button to return to the previous menu.

7. Press

button until No Account User Print is highlighted, and then press

(Set) button.

8. Press

button to select Off or On, and then press

(Set) button.

9. Press Cancel or

button to return to the previous menu.

10. Press

button until ColorTrack Error Report is highlighted, and then press

(Set) button.

11. Press

button to select Off or On, and then press

(Set) button.

12. Turn off the printer to apply the settings.

ColorTrack Mode

The following two authentication modes are available: the Internal Mode using user information registered on the printer,

and the External Mode using user information registered on an external server. To authenticate on the external

authentication server with External Mode, you need not register user information on the printer. The change becomes

effective after the printer is turned off and then on again.

No Account User Print

Specify whether to permit the printing of data with no authentication information. This setting is enabled when the printer

is restarted. The change becomes effective after the printer is turned off and then on again.

No-account User Password

Specify the password to be used for non-account user using 1 to 127 alphanumeric characters. If the password is left

blank (NULL), you cannot log in to a server. The change becomes effective after the printer is turned off and then on

again.

NOTE:

When External Mode is specified and No Account User Print is set to On, you must set a password.

NOTE:

When using an LDAP server, you also must set the same password on the server.

Re-enter No-account User Password

Enter the No-account user password again to confirm it.

ColorTrack Error Report

Advertising