Dell 5130cdn Color Laser Printer - Manuel (Page 200)

MPF
Mode
Specified Stop printing and show an error on the operator panel if the paper specified from the printer
driver does not match the paper configured for the MPF from the operator panel.
Driver
Specified*
Continue to print even if the paper specified from the printer driver does not match the paper
configured for the MPF from the operator panel.
Display
Popup
On*
Specifies the size and type of paper loaded in the MPF. This item is available only when Panel
Specified
is selected for MPF Mode.
Off
Size and type of paper loaded in the MPF is not specified. This item is available only when Panel
Specified
is selected for MPF Mode.
*
1
S2 indicates papers whose one side has been printed already.
NOTE: For the tray 1, optional 550-sheet feeder, or optional 1100-sheet feeder setting paper size is not required.
These trays detect the paper size automatically. For more information on supported paper size for the standard and
optional trays, see " Supported Paper Sizes ."
Use this menu item to:
Optimize print quality for the specified paper.
Select paper source through your software program by selecting type and size.
Automatically link trays. The printer automatically links any trays containing the same type and size of paper, if you
have set the Paper Type to the correct values.
Tray 1
Purpose:
To specify the paper loaded in the top tray.
Values:
Paper Type
Plain(60 to 90 gsm)*
Plain Thick (80/90 to 105 gsm)
Transparency
Covers(106 to 163 gsm)
Covers Thick (164 to 216g sm)
Label
Coated (106 to 163 gsm)
Coated Thick (164 to 216 gsm)
Envelope
Recycled
Letter Head
Paper Size
Auto*
Monarch
DL
C5
Envelope #10
Custom Size
X Size
210 mm*/8.3 inch*
Specifies the width of the custom size paper.
77 - 215 mm/3.0-8.5 inches
Y Size
297 mm*/11.7 inch*
Specifies the length of the custom size paper.
127 - 355 mm/5.0-14.0 inches