Dell 5130cdn Color Laser Printer - Manuel (Page 215)

"xxxx" is a hexadecimal variable value.
Backup IP Address / Host Name & Port
Specify the backup IP address or the host name, and the port address, as necessary. Specify the backup IP address or the
host name, and the port address after specifying the IP Address / Host Name & Port. The change becomes effective
after the printer is turned off and then on again.
NOTICE: Do not use the same port address as that of another port.
NOTICE: Set the backup server after setting the main server.
NOTE: The port address must be 389, 636 or between 5,000 and 65,535. The default value is 389. When using
LDAPS, normally specify 636.
NOTE: Specify the IP address in the nnn.nnn.nnn.nnn format for IPv4. Each section of "nnn" is a variable value
between 0 and 255.
NOTE: Specify the IP address in the xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx format for IPv6. Each section of
"xxxx" is a hexadecimal variable value.
LDAP Server
Displays the current software information of the LDAP server.
Operation Information
Search Directory Root
Specify a text string as the origin of the search when using LDAP communication. The change becomes effective after the
printer is turned off and then on again.
For example: ou=colortrackv3,dc=win2003ad,dc=colortrack.dc=net
Login Name
Specify the login name for accessing the directory server with LDAP authentication. Specify the name of a user with the
authority to update the LDAP server. The change becomes effective after the printer is turned off and then on again.
Password
Specify the password for accessing the directory server with LDAP authentication. Specify the password of a user with the
authority to update the LDAP server using 1 to 127 alphanumeric characters. If the password is left blank (NULL), you
cannot log in to a server. The change becomes effective after the printer is turned off and then on again.
Re-enter-Password
Enter the password again to confirm it.
Search Time-Out
Specify the amount of time the printer should wait for searching for the server. To specify a time-out period for searching,
select Wait, and set the time period from 5 up to 120 seconds. To not specify a time-out period, select the Wait LDAP
Server Limit. The change becomes effective after the printer is turned off and then on again.