Dell 5130cdn Color Laser Printer - Manuel (Page 236)

Press
See " Contacting Dell ."
Format Error
016-387
Data Violation
Press
In downloading the firmware, the format
of a download file is inaccurate.
Press (Set) button.
Contact Dell if this message appears repeatedly.
See " Contacting Dell ."
Protection Error
016-391
Data Violation
Press
A firmware download was performed
while it was prohibited.
Press (Set) button.
Contact Dell if this message appears repeatedly.
See " Contacting Dell ."
Erase Flash Err.
016-392
Contact Support
If Message Returns
A ROM erasing error occurred while
downloading the firmware.
Contact Dell if this message appears repeatedly.
See " Contacting Dell ."
Write Flash Err.
016-393
Contact Support
If Message Returns
A ROM writing error occurred while
downloading the firmware.
Contact Dell if this message appears repeatedly.
See " Contacting Dell ."
Verify Error
016-394
Contact Support
If Message Returns
A verification error occurred while
downloading the firmware.
Contact Dell if this message appears repeatedly.
See " Contacting Dell ."
016-522
Restart Printer
Certificate Fail
Contact Administer
An SSL authentication error of the LDAP
server has occurred. The SSL client
certificate cannot be acquired.
The SSL client certificate is required from the
LDAP server.
Ask your system administrator to set the SSL
client certificate on the printer.
016-523
Restart Printer
Certificate Fail
Contact Administer
An SSL authentication error of the LDAP
server has occurred. The server
certificate data is invalid.
The printer cannot trust the SSL certificate of the
LDAP server. Ask your system administrator to
register the root certificate of the SSL certificate
of the LDAP server on the printer.
016-524
Restart Printer
Certificate Fail
Contact Administer
An SSL authentication error of the LDAP
server has occurred.
The server certificate is invalid or the
address of the LDAP server set on the
printer does not match the one described
in the SSL certificate.
Ask your system administrator to use a valid SSL
certificate of the LDAP server.
Ensure that the address of the LDAP server set
on the printer and the address described in the
SSL certificate of the LDAP server match.
This error can be cleared by disabling LDAP-
SSL/TLS Communication under SSL/TLS in the
printer menu. Take note that the validity of the
connected LDAP server will not be guaranteed in
this case.
016-527
Restart Printer
Certificate Fail
An SSL authentication error of the
Kerberos server or the LDAP server has
occurred.
Ask your system administrator to confirm
whether the Kerberos server or the LDAP server
is set correctly on the printer.