Dell 5130cdn Color Laser Printer - Manuel (Page 408)

016-404 is
displayed when
setting the
encryption of
the HDD to
OFF.
The HDD is formatted and the certificate data is deleted
when setting encryption of the HDD to OFF. Since a
certificate is required and the security function cannot be
enabled when restarting the device afterward, 016-404 is
displayed and the security setting must be initialized. The
cause is the same when formatting the HDD or removing
the HDD.
After initializing, import the certificate and
enable the security settings again. The
action is the same when formatting the
HDD.
016-404 is
displayed when
formatting the
HDD.
Security is set
to OFF when
setting
encryption of
the HDD to
OFF.
Security is set
to OFF when
formatting the
HDD.
A certificate is
deleted when
setting
encryption of
the HDD to
OFF.
A certificate is
deleted when
formatting the
HDD.
A certificate
cannot be set
with "Certificate
Details".
The validity period is invalid.
The validity period of the certificate is
invalid. Confirm whether the time setting
of the machine is correct, and whether
the validity period of the certificate has
expired.
The certificate path is invalid.
The certificate chain (path validation) of
the imported certificate may not be
correctly validated. Confirm whether all of
the high-level certificates
(Trusted/Intermediate) have been
imported and are not deleted, and
whether the validity period has expired.
Although a
certificate was
imported, it is
not displayed
when selecting
with "Local
Device".
The type of the certificate is incorrect.
To import a certificate for use with the
device (own device), import the secret
key and a certificate of the PKCS#12
(p12/pfx) format as a pair.
Server
validation is not
operating
correctly.
The certificate chain is incorrect when importing.
Although importing a root certificate
(Trusted) to use for server authentication,
an Intermediate certificate may be
required when validating the path.
When executing a certificate file with the
certification authority, create the
certificate with a format including all
paths and then import that certificate.
Digital
Signature
cannot be
selected with
the IPsec
setting.
The certificate cannot be associated.
Either the certificate has not been
imported or the certificate has not been
associated for use with Digital Signature
of IPsec. Refer to " Setting the Certificate
in the IPsec Digital Signature Mode " to set
a certificate of Ipsec.