Wireless lan – Dell 5130cdn Color Laser Printer Manuel d'utilisation

Page 131

Advertising
background image

Re-enter

Community
Name (Trap)
*

1

Enter the community name used for trap again to confirm it.

Trap

Notification 1-4

Select the check boxes to notify trap occurrence. In this case, specify the IP address and IP socket in

the following format:

IPv4

Specify the IP address and IP socket in the nnn.nnn.nnn.nnn:mmmmm format. Each section of "nnn"

is a variable value between 0 and 255. Note that values 127 and 224-254 are not valid for the first

three-digits only. IP socket mmmmm is a variable value between 0 and 65,535.

IPv6

Specify the IP address and IP socket in the xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmmmm

format. Each section of "xxxx" is a hexadecimal variable value between 0 and ffff. IP socket

mmmmm is a variable value between 0 and 65,535.

Authenticate

Error Trap

Select the check box to notify Authenticate Error Trap.

*

1

The default value of each items can be changed by using Dell Printer Configuration Web Tool.

SNMP v3

Purpose:

To edit the detailed settings of SNMP v3 protocol.

To enter this page, click Enable SNMP v3 Protocol in the SNMP page.

Values:

Administrator Account

Account Enabled

Select the check box to enable the administrator account.

User Name

Enter the user name of the administrator account.

Authentication

Password

Specifies the authentication password of the administrator account

using 8 to 32 alphanumeric characters.

Re-enter

Authentication

Password

Enter the authentication password of the administrator account

again to confirm it.

Privacy Password

Specifies the privacy password of the administrator account using 8

to 32 alphanumeric characters.

Re-enter Privacy

Password

Enter the privacy password of the administrator account again to

confirm it.

Print Drivers / Remote

Client Account

Account Enabled

Select the check box to enable the print drivers and remote client

account.

Reset to default

Password

Click to reset the password for the print drivers and remote client

account to default.

Wireless LAN

Purpose:

To configure the detailed setting for the wireless network.

To use the wireless adapter, be sure to disconnect the network cable.

NOTE:

Once wireless LAN is activated, wired LAN protocol will be disabled.

Values:

SSID

Specifies the name that identifies the wireless network. Up to 32 alphanumeric characters.

Advertising