Dell 5130cdn Color Laser Printer - Manuel (Page 59)

* 2 WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register devices required
for wireless configuration, by pressing the button provided on the access point via wireless routers, and then performing
WPS-PBC setting on the operator panel. This setting is available only when the access point supports WPS.
NOTE: The optional wireless adapter must be installed on the printer.
NOTE: For information on how to install a wireless adapter, see " Installing a Wireless Adapter ."
Using Wizard Setup to Configure a Wireless Adapter
1. Insert the Drivers and Utilities CD provided with the printer in your computer. The Easy Setup Navigator file
launches automatically.
2. Click the Wireless Configuration button on the Easy Setup Navigator window.
The Wireless Configuration window opens.
3. Select Wizard and click Next.
The instruction video starts.
4. Follow on-screen instructions until the Wireless Setting Tool button appears.
5. Click Wireless Setting Tool.
The Wireless Setting Tool starts.
6. Comments appear about connectivity. Click Next.
NOTE: When the printer has already been connected, this screen does not appear. In addition, this screen will not
change to the next screen until the printer is connected.
7. In the list on the Select Printer screen, select the wireless printer you want to set up, and then click Next.
NOTE: When only one printer is connected through the USB, the Select Printer screen does not appear.
8. On the Enter Wireless Network Settings screen, enter your wireless settings, and then click Next.
9. On the Select IP Mode screen, select the IP mode you want to set up, and then click Next.
When IPv4 Only is selected:
On the Enter IPv4 Address Settings screen, select each setting, and then click Send to send the wireless
settings to the printer.
When IPv6 Only is selected:
On the Enter IPv6 Address Settings screen, select each setting, and then click Send to send the wireless
settings to the printer.
When Dual Stack (both IPv4 and IPv6) is selected:
a. On the Enter IPv4 Address Settings screen, select each setting, and then click Next.
b. On the Enter IPv6 Address Settings screen, select each setting, and then click Send to send the wireless
settings to the printer.