Dell 5130cdn Color Laser Printer - Manuel (Page 137)

Remote peers IPv6
address
Specifies the IP address to connect to.
Non IPsec
communication
policy
Selects whether or not to communicate with a device which does not support IPsec.
* 1 This item is effective only when the optional hard disk is installed and is set to On for encryption.
NOTE: If IPsec is enabled with incorrect settings, you must disable it using the Reset IPsec menu on the operator
panel.
802.1x
Purpose:
To specify the settings for IEEE 802.1x authentication for encrypted communication to the printer.
Values:
Enable IEEE 802.1x Select the check box to enable IEEE 802.1x authentication.
Authentication Method
EAP-MD5
Select the authentication method to use for IEEE 802.1x authentication.
EAP-MS-CHAPv2
PEAP/MS-
CHAPv2
Login Name: (Device
Name)
Specifies the login name (device name) for IEEE 802.1x authentication using up to 128
alphanumeric characters.
Password
Specifies the login password for IEEE 802.1x authentication using up to 128 alphanumeric
characters.
Re-enter Password Enter the login password again to confirm it.
IP Filter
Purpose:
To specify the IP address and subnet mask to be permitted or denied access to the printer.
Values:
Address
Specifies the IP addresses that are permitted or denied access to the printer. Enter a numeric value
between 0 and 255 in each field.
Address
Mask
Specifies the subnet mask that are permitted or denied access to the printer. Enter a numeric value
between 0 and 255 in each field.
Active
Mode
Reject Rejects printing from specified network address.
Permit Permits printing from specified network address.
Disabled Disables the IP Filter feature for the specified IP address.
Copy Printer Settings
The Copy Printer Settings menu includes the Copy Printer Settings and Copy Printer Settings Report pages.
Copy Printer Settings
Purpose:
To copy the printer settings and ColorTrack (Internal Setting) to one or more of the same model of the printer.