Dell 5130cdn Color Laser Printer - Manuel (Page 197)

Black* Prints in the black and white mode.
Color Prints in the color mode.
PostScript
Use the PostScript menu to change printer settings that only affect jobs using the PostScript emulation printer language.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
PS Error Report
Purpose:
To specify whether the printer outputs error contents for a PostScript error. The change becomes effective after the
printer is turned off and then on again.
Values:
Off Discards the print job without printing an error message.
On* Prints an error message before it discards the job.
NOTE: This instructions from the PS driver override the settings specified on the operator panel.
PS Job Time-Out
Purpose:
To specify the execution time for one PostScript job. The change becomes effective after the printer is turned off and then
on again.
Values:
Off* Job time-out does not occur.
On 1-900 min. A PostScript error occurs if processing is not completed after the specified time.
PaperSelectMode
Purpose:
To specify the way to select the tray for PostScript mode. The change becomes effective after the printer is turned off and
then on again.
Values:
Auto* The tray is selected as the same setting as in the PCL mode.
Select from Tray The tray is selected in a method compatible with regular Post Script printers.
Default Color
Purpose:
To specify the color mode to Color or Black. This setting is used for a print job which does not specify a print mode.
Value:
Black Prints in the black and white mode.
Color* Prints in the color mode.