Install optional accessories (if applicable), Install optional accessories (if, Applicable) – Dell 5130cdn Color Laser Printer Manuel d'utilisation

Page 15: Installing a 550-sheet feeder

Advertising
background image

Back to Contents Page

Install Optional Accessories (if applicable)

Installing a 550-Sheet Feeder

Installing a 1100-Sheet Feeder

Installing both 550-Sheet Feeders and 1100-Sheet Feeder

Installing an Output Expander

Installing a Memory Module

Installing a Hard Disk

Installing a Wireless Adapter

Configuring a Wireless Adapter

You can make the printer more functional by installing the optional accessories. This chapter describes how to install

printer accessories such as the 550-sheet feeder and wireless adapter.

Installing a 550-Sheet Feeder

CAUTION:

If you are adding a 550-sheet feeder after setting up the printer, be sure to turn off the

printer, unplug the power cable, and disconnect all cables from the back of the printer before

completing these tasks.

CAUTION:

When lifting the 550-sheet feeder, grasp and lift the printer as instructed on the label of the

feeder.

1. Turn off the printer and unplug the power cable. Then, disconnect all cables from the back of the printer.

2. Pull out the tray until it stops. Lift the front slightly and remove it.

3. Lift the printer and align the three guide pins of the 550-sheet feeder with the holes at the bottom of the printer.

Gently lower the printer onto the 550-sheet feeder.

Advertising